3 Common Sanborn Air Compressor Problems (Troubleshooting)

sanborn air compressor problems
sanborn air compressor problems

Sanborn Air Compressors look pretty old-school and that is not untrue either. These are some of the oldest air compressors in the market, but that extensive experience in manufacturing allows Sanborn to remain one of the best and most trusted brands for all sorts of small-scale domestic and commercial applications. Their air compressors might look old, but they got some serious durability on them and they work great under stress and all kinds of situations.

However, due to these Sanborn Air compressors using some of the old technologies, you might be facing some problems with them that can ruin the experience for you. There is not much to take care on the mechanical part as these air compressors are durable for certain and there are no such issues and problems with the durability of these air compressors. But a few problems that you might have to face on these air compressors from Sanborn and their fixes are:

Sanborn Air Compressor Problems

1) Won’t Turn On

At times your Sanborn Air Compressor will simply refuse to turn on and you will find yourself in a fix. The first thing that you should be checking in such cases is the voltage that you are getting on your circuit. If the voltages are less than they should be, that can totally be the reason for your air compressor to not turn on. Also, the voltages might be fluctuating and since the circuit on these air compressors is not that advanced, and you can have problems with it. You should be using a voltage stabilizer with your air compressor from Sanborn and that is going to solve the voltage fluctuating problem that you might be getting on the air compressor.

Another thing that you will have to check on is all the wiring and make sure that the wires and cables are not damaged at any point. You will also need to check on any sharp bends on the cable and replace the cable if you find it damaged at any point. Also, you will need to check on all the circuit breakers and fuses to ensure that they are in the right order.

A tripped circuit breaker or a blown fuse can stop your air compressor from turning on. So, replace the circuit breakers and fuses if needed and that will help you in making the right use of your Sanborn Air Compressor.

2) Rattling Noise

Noise is not a new thing for those who are using Sanborn Air Compressor. A minimal amount of noise is quite something that you will get used to in a week or two and after that, you will not notice it much. Unless you hear some noiseless air compressor running, but it is all good and pretty acceptable. However, if you are hearing too much noise on the air compressor, that can be caused due to certain reasons.

If you are getting some rattling sound on the air compressor, it means any nut or bolt might be loose or the rubber pads can be worn out. You need to tighten all the nuts and bolts and the problem you are facing will be gone for good. Also, make sure that the rubber pads are in the right order and have not get hard due to humidity or any other similar thing. Lastly, you need to make sure that the Sanborn Air Compressor is installed on a flat and straight surface. If it is uneven, that can cause you to face this rattling noise problem.

3) Motor Noise

Motor noise can be distinguished from those rattling sounds, as it sounds like metal grinding and growling and is indeed something that you would never want to have on your air compressor. Motor noise can also mean there is something wrong inside the motor of your air compressor and it might need some repairs.

First of all, you should change the lubricant in your motor if you are hearing such sounds and that will help you in solving the problem for good. However, if that doesn’t work out and you still hear excessive noise coming out of the motor of your Sanborn Air Compressor, you should get the motor checked with some technician and they will be able to fix it for you.

Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments