Stanley Jumpit 1000 Air Compressor Not Working: 3 Fixes

stanley jumpit 1000 air compressor not working
  • Save
stanley jumpit 1000 air compressor not working

Stanley Jumpit 1000 Air Compressor is not simply an air compressor that you can use to inflate your tires, but it got a lot more to it. The air compressor got quite a large battery on it that allows you to enjoy a perfect edge of jump-starting if your car gets stuck without a battery at some place or if the generator dies out.

If your Stanley Jumpit 1000 Air compressor is not working. Here are a few things that you need to take care of:

Stanley Jumpit 1000 Air Compressor Not Working

1) Charge it up

Well, first things first and it needs to be run on the battery. If you don’t have the batteries charged, or don’t have enough power on the batteries, the air compressor will refuse to be turned on and started. This is something quite troublesome that you wouldn’t want to deal with if you are out there on a road trip and your car runs out of battery or you need to inflate some tire.

That is why you should ensure that you are charging the batteries to full every time you leave for a trip on some highway, or inter-city travels. For those off-road trips to some camping grounds or adventurous runs, you can never take any risks and you must ensure that your air compressor is charged up to the brim.

2) Check Connections

If you are using the air compressor connected with your batteries to inflate the tire, then that might also be causing you the problem. The best thing about Stanley Jumpit 1000 Air compressor is that it cannot only give output for your vehicle battery to start it up, but it also has the option to use the battery power directly for inflating the tires. That is why you need to make sure that you have plugged those cables and connectors on the input port and not the output port on your air compressor.

Moving forward, you will have to plug those clamps tightly on the battery and they need to go on the right terminal as well. Red is for the negative terminal of the battery and black is for the positive terminal. This will help you out in making it work in the right manner and you will not have to be stuck again in some tight corner after you ensure that the clamps have been plugged on correctly.

3) Get it Checked

If you are unable to get the air compressor charged, or it still doesn’t work after trying the solutions above, then there are not many options left that you can try at home. It will not be safe for you and will be voiding the warranty as well if you try something like opening it on your own or get it checked by some unauthorized technician. Hence, it would be better to take it to some authorized service center from Stanley and they will be able to thoroughly diagnose the problem for you and fix it for good.

  • Save
Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments
Share via
Copy link
Powered by Social Snap