Air Compressors have become a necessary part of most of the applications that they are being used for. These air compressors make life much easier for you as you can use them for all the compression needs. Commercial air compressors have grown from inflating tires only and they are used for different applications. These include HVAC, airlifts, and a lot more. So, you will need to choose the best air compressor for the needs that you might have.
Puma Air Compressors is one such brand that is manufacturing and distributing these air compressors all around the US. These Air Compressors are the right thing for you if you are looking for an air compressor for commercial needs. They come in all sorts of power capacity and sizes so you can choose the right air compressor for you depending on what scale you want it to work at.
The Puma Air Compressors are pretty reliable and they don’t tend to stop working more often. However, if your Puma Air Compressor stops working for some reason and you are unable to get it going. Here are a few things that you must know about.
Puma Air Compressor Problem
1. Compressor Won’t Turn on
While you will not have to face the problem if you have done everything right and have set the wiring inaccurate manner. However, this might cause you to have some problems at times. Your Puma Air Compressor will simply refuse to turn on, no matter what to do, and that can be quite troublesome for you.
However, there is nothing to get panicked about and you should start diagnosing the problem in an effective manner. To start that, you should check on the electrical outlet that you are using to plug in your Puma Air Compressor and make sure that it is in the right order and the current is flowing through it.
Secondly, the problem is caused due to voltage fluctuation or if your circuit is supplying lower voltage than required for the Puma Air Compressor to run. First of all, check on the voltages and if you feel like there is a bit of fluctuation on it. That might be stopping your Air Compressor to turn on. This should not be a big issue to solve. All you will have to do is get a well-rated Voltage Stabilizer and install it with your Air Compressor. That is going to help out with the problem and you will be able to use your Air Compressor without having many problems.
2. Squeaking Sounds
Puma claims to have a noiseless operation on their air compressors and that is true up to some extent. These air compressors have the right motor installed that cancels all the noise and if you are using the right grade of oil in it, that would cause you to avoid such sounds in the first place.
If you are hearing some squeaking sounds while your air compressor is running. These sounds might not be from the motor itself, but they can be caused due to friction or dryness on the belt. The rubber belt that is used to move the pully needs to be changed at frequent intervals. Not only that, but you should also keep the belt lubricated using the recommended lubrications such as grease or oil to ensure that it doesn’t interact with the rust on the pully and cause you to have problems with excessive noise.
3. Broken Belt
If you don’t take care of the air compressor belt in the optimal manner as it is recommended. The continuous running of the belt can cause wear and tear on the belt. It certainly bears all the friction that is present on the belt and the pully and that will cause you to have different issues and problems on the belt and eventually it will break down and you will have to replace that.
You should keep a belt handy at all times so you can change it whenever needed and you don’t have to face any inconveniences. Just make sure that you keep the right size of belt and take care of it in the right manner and that will help you to keep the belt for its lifetime and then you can replace it before it breaks down.