DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, I receive a commission. As an Amazon Associate I earn from qualifying purchases.
The tools you purchase is supposed to get job done. But the tool that really makes the difference are the compressor. For years the air tools in workshop were known as American power and Japanese precision.
Then along came Metabo HPT, which inherited Makita line and combined their engineering with Makita’s. So now you have a new brand, but has it made for a good product? How does it perform?
Comprehensive Review of Metabo HPT Air Compressors
Metabo HPT Brand Heritage and Evolution
These include noise level, pressure recovery, and more. If you’re doing something noisy like inflating a tire in your house or using nail gun, these measurements is important. Brands such as California Air Tools and Campbell Hausfeld compete in this space and the designs has been improved by Metabo HPT to be similar, then more powerful and durable.
Pancake Model Features and Design
The pancake model explains garage compression. For portability without sacrificing power, Metabo HPT designed it around a 1.5 HP motor and a 4.2 gallon tank. That might sound modest, but factor in the pressure recovery rate.
This is the amount of time required to fill up the tank after use. The faster the recovery rate, the longer you work and the less you wait. Metabo HPT accomplishes this via a strong piston pump that operate cooler than most competitors.
Not only does this extend life of unit, but it also minimizes risk of overheating on lengthy sessions. Practicality is also served by vertical design. With a small footprint the unit will fit nicely into a cluttered garage or even a busy workbench.
It provides sufficient airflow for both brad nailer and framing nailers yet it stores easily. The handle are sturdy and the casters lock to keep it from rolling off when moved. It is piece of equipment that doesn’t take up too much room but fits well within the space.
Twin Stack Compressor Advantages
If a little more capacity would suit your needs, then it’s time for the next step; the twin stack. By stacking two tanks one on top of the other, this design double the amount of air storage. That added air storage result in longer run times before the motor has to restart.
This is useful for applications where larger impact wrenches are being used, or when you’re painting and want that buffer between the motor start/stop. Because the motor sits further up off the bottom of the tank, it remain above any debris that might settle there while keeping water out of the motor. This not only prolongs life of the engine, but also keeps maintenance down.
Noise Reduction and Durability
Metabo HPT are also good at reducing noise. A lot of old compressors is loud, bad on your hearing, and annoying to neighbors. Metabo HPT use a rubber dampening system that isolate the motor vibrations from the tank.
It’s more like a hum than a scream. It is not silent. But it is quiet.
It is quiet enough that you can hold a conversation with it running. That adds up to a better experience if you’ve got a long day’s work ahead. The units in this product line are very well made.
They have a thick, strong metal casing that resist dents. This is important if you lug them around job sites. The fittings are brass and retain their pressure well.
Maintenance Free Operation and Reliability
No air leaks equals no wasted air or time on your part. Because they have oil free pumps, users who don’t like messing with maintenance can forget about it. It just runs.
It just runs. When selecting a compressor I went with Metabo HPT because they’re reliable. It has no bells and whistles.
It just provides good solid air whenever needed. Whether you’re nailing together a deck or finishing the last piece of drywall, knowing you have a reliable air supply will change your pace. Suddenly you’re focused on doing the task versus struggling with your tools.
That quiet hum in the background means you got the job finished actualy correctly.