Central Air Compressor Not Kicking On: 3 Fixes

central air compressor not kicking on
  • Save
central air compressor not kicking on

Central Air Compressors are the best way to make it work for the heating or cooling needs for those large buildings as split ACs might not be able to cover the needs that you can have for such places. That is why you will have to ensure that there are no issues with these Central Air Compressors.

If it is not kicking in for any certain reason, then you will need to check on a few things. Here are a few solutions that you need to try if the Central Air Compressor is not kicking in.

Central Air Compressor Not Kicking On

1) Check on the Wiring

First of all, you will need to check on the wiring and make sure that there are no issues at that part. If your wiring is damaged due to a short circuit, or it might have been broken at some point, you will need to make it work. You need to get your whole wiring diagnosed and make sure that there are no damages, sharp bents, or burn marks on your air compressor. This will help you figure it out and you can use it again without getting to face any sorts of issues or problems with your air compressor.

Another thing that you will need to take care of is that you will have to ensure that you are running the right cables with the load capacity that is needed to run the central air compressor. It might require some of the high-end cables so you need to be careful about it. It would be better to ask about the rating of the cables that are recommended by the company of your air compressor and that will help you get it going in no time at all.

2) Circuit Breakers

Circuit Breakers are another major issue that might be causing you to have the problem. If one of the circuit breakers is tripped at some point, that will interrupt the current supply on your air compressor. These circuit breakers are in place to make sure that your system is safe.

So, it would be unwise to try something like getting it detached from your circuit completely. That is why, you will have to ensure that the circuit breakers are not off, and they are attached to your circuit. Just turn them on if they are tripped and closed and that will be able to make it work for you.

3) Compressor Leakage

There is also a safety system that will stop your air compressor from kicking in if there is some sort of gas leakage on the compressor. That is why you will have to face certain issues and the air compressor will simply not kick in and turn on. You will need to check on the refrigerant gas and make sure that it is topped up optimally. Also, if there are any leakages, you will have to fix them as well and you will be able to make it work in the perfect manner after the gas top-up.

  • Save
Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments
Share via
Copy link
Powered by Social Snap