20 Best 60-Gallon Air Compressor Reviews 2022

The Husky C602H Air Compressor has a vertical shaped air tank design. It is a heavy-duty air compressor model that can be used for different tasks such as painting, fastening, drilling, and inflation. The air tank holds a maximum of 60 gallons; this air compressor unit can produce as much as 155 PSI. The air compressor weighs about 209 pounds, and it has a sturdy tripod stand at the base which helps to reduce vibration while the engine is running. The air compressor also features a control panel with an analogue air pressure gauge that shows the air tank level while the engine is running.

This is one of the air compressors that start with an electric induction motor. The voltage rating of the motor in this unit is stated as 230V, and it has a low amp draw. The air pump is made from cast iron; it is oil-lubricated and can run for a guaranteed 30,000 hours from the date of its first use. This is a reliable air compressor that can improve the outcome after finishing a job.

This is one of the belt-driven heavy-duty air compressors with a large air tank. The vertically positioned air tank in this unit can hold 60 gallons. The air compressor also features an air pump that can generate a maximum air pressure output of 155 PSI, and at 4 CFM, the air compressor produces a consistent 90 PSI. The air compressor has a direct drive electric motor that also features an easy starter system. The electric motor has a voltage rating of 240V which is adequate for the operation of different air tools.

The control panel on this air compressor unit features an analogue air pressure gauge and the coupler valves which are made from steel. The belt-driven system also has a thermal overload protection feature that can sustain long hours of use without any damages. There is a quick drain valve at the bottom of the air tank; this is used to let out water which has been condensed while air pressure is released through the air hose. The 60-gallon air tank in this unit makes it suitable for the operation of air tools needed for major projects.

The EMAX Industrial PLUS Series has an electric start system that can sustain the air pump’s functions for long hours. This heavy-duty air compressor has a large air tank with the capacity to hold 60 gallons. These air compressors with larger air tanks are necessary for big projects because they shorted recovery times and can be used for long hours to quicken the pace of a job. The air tank is made from cast iron; it features a drain valve at the base which is used to remove water that gathers beneath the air tank.

The 2-stage air pump in this air compressor functions with an electric motor that has a 5.5 HP capacity. The air pump is made from cast iron; it is oil-lubricated and can deliver a maximum air pressure output of 175 PSI at 39 CFM. The control panel features two analogue air pressure gauges, a control switch, and two coupler valves. This is a stationary air compressor; it is kept steady during use by four sturdy legs at the base.

Maxair heavy-duty air compressors have been in the market for many years. They are notably durable and reliable. The air tank in this model can hold 60 gallons; it has a 150 PSIG rating. It takes only a few seconds to fill up the air tank because the system works with a direct drive electric motor. The air tank is made from cast iron; it has a quick drain valve at the base through which condensed water escapes from the system. The motor in this unit has a 5 HP standard rating; it is efficient and has a low amp draw. The voltage rating of the electric motor is 240 V.

This is a belt-driven air compressor which has high thermal stability components. The maximum air pressure that can be produced from the air pump is 170 PSI, there is a high flow regulator switch installed to control the air pressure output. Also, an analogue air pressure gauge has been installed in the system; it enables the user to monitor the air tank level while the air pump is working. This air compressor is reliable and has versatile functions.

The air tank in this air compressor unit is vertically positioned; this feature makes it easier for the drain valve located beneath the air tank to eliminate all traces of water that may have settled at the base of the air tank which holds 60 gallons. This is one of the air compressors in the market that is suitable for handling jobs that require long hours of work. The air tank is stationary; it is also enhanced for thermal stability. The air pump in this unit is oil lubricated, and it has a rating lower than 5 PPM for oil carry-over.

The maximum air pressure output from this unit is 175 PSI, which is produced by the belt-driven air compressor system. There is an inbuilt motor with a voltage rating of 230V, it functions at 1310 RPM, and sustains the air pump for a total of 30,000 working hours. The air pump is made from cast iron. On the control panel, there is an air pressure gauge used to monitor the air tank level. The system is also protected against oil shortage, which can damage the engine.

The air tank in this unit designed by the Dewalt brand can hold 60 gallons. It is in a vertical position however, the air tank is stationary. This air compressor unit is suitable for major projects in one site when it is not necessary to move the air compressor around often. The air tank is made from reinforced steel; it features a quick drain valve at the base to allow water escape from the system after use. This air compressor features an air pump that can generate a maximum air pressure output of 155 PSI.

The air pump in this compressor is oil-lubricated, which makes it function for longer hours with less noise and no worries about thermal overload. The air compressor works with a solidly built cylinder and a high-powered motor which has a voltage rating of 240V. The motor has a low amp draw and can start the air pump in cold weather. This air compressor is in high demand because of its versatile functions.

The Ingersoll Rand Air Compressor brand is one of the common products in the market. It is also suitable for major projects that require inflating things or the use of air tools. The air compressor has a capacity to produce a maximum air pressure output of 135 PSI. This output is sustainable for long hours due to the large air tank which can hold as much as 60 gallons. The air tank in this unit is made from cast iron, it sits on a sturdy tripod that can provide balance and keep the system from malfunctioning due to vibrations.

The air pump is made from steel, it is solid and durable, and the air pump for this unit is designed to work for 5,000 hours in between the regular maintenance. The air pump works with a direct drive motor which has a voltage rating of 230 V and a capacity to produce and sustain 3 HP at its optimal capacity. This is a versatile system that can be used for different jobs. It is electric powered and has a silent engine.

This is one of the heavy-duty air compressors designed by the NorthStar air compressor brand. It has a belt-driven system that supports long hours of use and low maintenance. The air tank in this unit can hold 60-gallons without any problems. It is a good choice for major projects. The air tank is made from cast iron, and it is thermally stable. This is one of the vertically positioned air compressors with a quick drain valve at the base of the tank. The air compressor is held firmly in a stationary position by a sturdy tripod stand.

The air compressor engine can produce a maximum air pressure output of 135 PSI. This output is possible because the unit runs with an oil-lubricated engine which features twin V-shaped cylinders. The high powered induction motor supports the system to produce 3 HP and can sustain long hours of use for the operation of air tools. The air pump is made from cast iron; it emits the output through reed valves that are made from solid steel.

The Industrial Air brand introduced this three-cylinder industrial model air compressor into the market, mainly for major contractors who work with air tools. This air compressor is stationary; it is balanced by a sturdy tripod leg design that keeps the unit steady when the engine is in use. The maximum air pressure output attainable with this air compressor unit is 155 PSI, and at 14 CFM, the air compressor produces 90 PSI. The large air tank can hold 60 gallons, which can be filled in seconds because of the high powered induction motor in the unit.

This is one of the oil-lubricated air compressor units with a 60-gallon air tank. The three-cylinder system improves its performance and reduces recovery time of the engine. The air pump is made from cast iron, it is durable, and the coupler valves are made from high-quality stainless steel. The induction motor has a voltage rating of 240V, which helps to start the engine easily, regardless of the weather conditions. This is a high capacity air pump with versatile functions.

This is a massive heavy-duty air compressor designed as a stationary unit for major projects. It has a large-sized air tank that holds 60 gallons. The air tank is made from cast iron; it is also tested for thermal stability. The air pressure output from this air compressor unit is 175 PSI at its maximum capacity. The unit features two coupler valves made from stainless steel which makes it convenient for workers who need to use two air tools at the same time.

This air compressor features a high powered motor that runs the air pump. The motor has a voltage rating of 120V and can support the functions of the air pump to ensure the 60-gallon tank is filled in a few seconds. The motor is also designed to withstand thermal overload which can damage the air compressor. The air pump in this unit is oil lubricated. On the control panel, there is an oil sight glass which makes it easy to monitor the oil level in the system. Also, the control panel holds the air pressure gauge, coupler valves, and the high flow regulator switch. This is an effective and easy to use air compressor.

This is one of the industrial air compressors designed for workers who need to use air tools for long hours every day. The engine in this air compressor is belt-driven. It features an air tank that can hold 60 gallons, which is adequate for big projects. The air tank has thermal stability, and it is made from reinforced steel, for extra durability. The maximum air pressure output from this unit is as high as 175 PSI. The air pressure output is monitored with an analogue air pressure gauge fixed on the control panel. The air pressure output is done through steel coupler valves which are durable.

The air pump in this unit is oil lubricated, to ensure that the system performs at maximum capacity at all times, the unit has an oil sight glass which can be used to monitor the oil level in the system and prevent a shortage which can cause damage. The air pump is made from cast iron; its functions are supported by twin cylinders and an induction motor. The voltage rating for the induction motor in this air compressor is 230 V, and it has a low RPM.

There are some air compressors that have twin cylinders to further boost the functions of the air pump; this is one of those units. The air pump in this air compressor unit is made from cast iron, it is durable and efficient. The air pump is also oil lubricated; its functions are supported by a large-sized air tank that can hold a maximum of 60 gallons. The air tank is in a vertical position and supported by a sturdy base to reduce vibration when the engine is in use. The entire air compressor system also works with an induction motor with a voltage rating of 240 V to sustain heavy-duty projects.

On the control panel of this air compressor, there is an air pressure gauge which can be used to monitor the air tank level during a project. The control panel also features a high flow regulator switch to control the air pressure output and a coupler valve made from stainless steel. The maximum air pressure output from this system is 155 PSI, which is adequate for the operation of different types of air tools.

The PowerMate Vx air compressor can generate a maximum air pressure output of 155 PSI. This is large, and at its optimal performance, users can work for long hours because the air compressor has a large-sized air tank that can hold 60 gallons. The air tank in this unit is stationary. It is supported by a sturdy tripod base; the air tank is in a vertical position which means that it can occupy less storage space. The air tank in this compressor unit is made from cast iron; it is durable and can last for many years.

Other features of this air compressor include the twin-cylinder air pump which is oil lubricated. The air compressor is shipped with a can of synthetic oil, and it has low sound output. The air pump is powered by an induction motor which has a standard rating of 240V. The motor in this air compressor unit has a low amp draw of 12 amps. The twin-cylinder air pump is made from cast iron; the unit also features an analogue gauge and a coupler valve. The power switch and high flow control switch are located by the air compressor. This is a heavy-duty air compressor that can be relied on for major projects.

This is one of the largest air compressor units designed by the Porter Cable brand. It has a massive air tank that can hold as much as 60 gallons. This large-sized air tank makes the air compressor a good choice for major projects that need to be done without frequent breaks to fill the air tank. The air tank in this unit is made from cast iron; it has a quick drain valve at the base which can be easily reached because of the air tanks vertical position. The air pump system in this unit is powered by a high capacity induction motor that can produce 3.7 HP. The motor has a voltage rating of 220V.

The maximum air pressure output from the air pump is 135 PSI, and at 11.5 CFM, the unit generates 90 PSI. The air tank in this unit is ASME certified. The air pump is oil-lubricated and has a low noise output. The air compressor also features an air pressure gauge, coupler valves made from Swedish steel and a twin-cylinder system for optimal performance. This is a reliable air compressor; it is suitable for the operation of different air tools.

The maximum air pressure output that can be produced by this heavy-duty air compressor is 175 PSI. This output capacity is sustained by a large-sized tank that can hold 60 gallons. The air tank is vertically positioned and has a quick drain valve at the base. This is a stationary air compressor; it stands on a sturdy tripod which reduces vibration when the engine is in use. The air pump in this compressor unit is made from cast iron, which enhances its durability, it is also oil lubricated, and has a low noise output.

This air compressor functions with an electric motor which has a low RPM and a 5 HP output. The motor has a dual voltage rating at 120V/ 240V. On the control panel, there is an oil sight glass and an analogue air pressure gauge which is used to monitor the level in the air tank while the unit is in use. The air pump is protected from damage by a low oil shutdown system which becomes active when the oil level drops too low. This is an easy to use and versatile air compressor.

The FS-Curtis Air Compressor is a popular brand in the market; it is one of the belt-driven air compressors with reliable features that can be used to operate air tools easily. The unit works with an oil-lubricated air pump which is fed by an air tank that can hold a maximum of 60 gallons. The air pump is made from high-quality steel for durability. At the base of the air tank, there is an auto drain valve which makes it easy to drain condensed water from the air compressor system.

The air pumps can produce a maximum air pressure output of 175 PSI at 18.5 CFM. This is possible with the cylinders which are made from cast iron and high-powered pistons. The electric motor in this air compressor has a low amp draw and a voltage rating of 230 V. The filter in this air compressor is made from metal, for extra durability, and the oil level in the unit is monitored through an oil-sight glass on the control panel.

This is one of the largest air compressors designed by the Campbell Hausfeld brand; it has a large air tank with a 60-gallon capacity. The air compressor unit also features an oil-lubricated air pump with the capacity to generate a maximum air pressure output of 40 PSI at 11.8 CFM and 90 PSI at 10.3 CFM. The air pump is made from cast iron, it can last for many years, and the functions of the air pump are improved by an induction motor which is inbuilt in the system.

The induction motor has a voltage rating of 240 V and a low amp draw of 30 amps. It powers the oil-lubricated air pump and can generate 3 HP. The unit also features twin cylinders that improve the functions of the air pump. There is a control panel in this system; it is located above the air tank. On the control panel, there is an analogue air pressure gauge, a power switch, and the coupler valves. This air compressor is stationary and suitable for the operation of different air tools.

The large size of the air tank in this air compressor unit does not have an impact on its sound output. When the engine is running, the system emits only 75 decibels, which makes it adequate for use in project sites where low noise is required. The maximum capacity of the air tank is 60 gallons. And the air pump is designed to produce a maximum of 125 PSI at its optimal capacity. The air pump in this unit is oil-free and has low maintenance requirements. The air pump is made from cast iron, which makes it durable.

The unit functions with an electric motor which has a low amp draw. The motor has an RPM rating of 1680, which improves performance and reduces wear. The motor can generate 2HP at its maximum capacity. Other features of this air compressor that improves its performance are the dual-pistons, an air pressure gauge, the coupler valves which are made from stainless steel, and the high flow regulator switch. At the base of the air tank, there is a sturdy tripod base that reduces vibration when the air compressor is in use.

This Ingersoll Rand Type-30 model features a massive air tank that can hold a maximum of 60-gallons. The air tank in this unit is made from high-quality cast iron, and it has been painted to prevent corrosion. The air tank also has thermal stability. The large-sized air tank stores gallons that can be used for major projects such as painting, or fastening, with air tools. The maximum air pressure that is generated as the total output from this air compressor is 175 PSI; the unit has an air pump which is splash lubricated by oil. The air pump is made from cast iron and has a single outlet.

There is an induction motor in this air compressor; it has a voltage rating of 230 V and an amp draw of 40 amps. The motor is designed to sustain a pump life of 10,000 hours. At the base of the air tank is a quick drain valve to eliminate condensed water from the system. This is a durable stationary air compressor with heavy-duty features. It is belt driven and features twin cylinders. The air pressure output makes this unit a good choice for people who frequently use air tools.

This is one of the heavy-duty air compressors with a large-sized vertical shaped air tank. The vertical position of the air tank helps to sustain the units’ stability when the engine is running. The air tank can hold as much as 60 gallons. This air compressor is adequate for major projects because it can be used for long hours without breaks. The air pump in this unit is oil lubricated, and it is made from cast iron which increases the durability of the air pump.

This air compressor is belt-driven; it functions with V-shaped twin cylinders that reduce the sound output when the engine is running. Air tools can be connected to the system through the coupler valves which are made from stainless steel. This is a two-stage cast iron air pump unit that has an induction motor; this means it can be used in all types of weather.